Turning A Carport Into A Multi Use Room
Years ago when we first bought our old cabin in the woods, we had all of our five teenage children at home, and not enough rooms to give them all some privacy.
The old home had a carport off the end of the house, where the car barely fitted because of what else was stored under there.
At the other end from the family chariot, was some space that we used to store boxes (and other stuff) before they were unpacked, and a place found for the contents.
We had inherited another old shed - of sorts - that defied gravity and the best attempts of mother nature to bring it down.
So, after we had found a home for all the goods and chattels that occupied the carport, it was time to turn it into a live-able room. I built this in my spare time, and was lucky to already have the roof in place.
Once the supporting framework of the stud walls was added, the steel posts that had supported the roof were removed. They were re-used for a back verandah on the northern side of the house. I built it later.
The two windows shown here were taken out, and became a double window along the short side of the room, while I sourced some other timber-frame windows for the long wall.
The first window space became a door between the rooms, and the second was covered completely when the interior was lined.
All the exterior log linings were re-used on the new exterior walls.
An access ramp was added a little later, and this was covered with a narrow verandah roof.
Being in a hurry to get the room ready for occupation, it was lined inside, but the ceiling - of tongue and groove boards - was never ever painted.
Until now.
Years of exposure outside had darkened and weathered the timber. In our advancing years, with our eyesight not what it was, the LOML suggested that a coat of paint might not only brighten things up, but also help us to see better when we use this room.
Did I say - we - you all know what I mean though, don't you.
Because of the immutable law that says that we will fill whatever space is available to us, and the fact that we are expecting family guests this weekend, the furniture etc has to stay in the room while I paint around it.
It is being done in two halves.
It doesn't look like it because of the wide angle lens used for the picture........ but.......
The far end (half the room) is finished, while the half nearest is 3/4 undercoated, with one panel left to do.
This is all brush work, and involves lots of looking up with a bent neck.
You can see what the original timber lining boards looked like before undercoating.
And the finished colour at the far end isn't too shabby.
Hope she's happy..................
................... I know I am.
Happy woodworking to all.
Monday, March 4, 2013
Friday, March 1, 2013
The Disston Number 9 Backsaw - A Lucky Find
My hometown is Brisbane, and we often travel there - as I have oceans of family in that lovely city.
On one of our recent trips, we were making good time, so we planned a late lunch and pulled off the highway into the little hamlet of Bangalow.
There is a particular park that has been a stopping spot for us for decades.
Well, on this occasion, the town was busy - no car parks anywhere - not even down by the old railway station.
We drove around and around before spotting a vacancy at the bottom of the hotel carpark.
For Patrons Only didn't worry us, as we were going inside to order drinks in any case.
Unknown to us all these years, was the fact that we had parked next to the back gate of HEATH'S OLD WARES & COLLECTABLES
After lunch the emporium begged us to go see.
heathsOldWaresCounter.jpg
Apart from having cornered the market in old wooden ladders, Heath had aisles full of wonders.
It was down this next aisle that I discovered a milk churn full of saws:
aisle1HeathsOldWaresBangalo.jpg
And among these saws there was this:
Needless to say, it didn't look this good at the time, and it has had a set and a sharpen since, but it was an unmistakable Disston Number 9 Backsaw.
The handle was complete, with no cracks or chips out of the spurs.
Even the brass saw nuts were in good shape.
The blade was straight and had only the slightest suggestion of rust dimpling.
This was a must have!
A quick check of my wallet showed that the moths had long ago vacated, and I was in the position of convincing my beloved of what an awesome buy this was, and could she go find an ATM while I guarded this piece of royalty of the sawmaker's art.
Long story short - it travelled with us to Brisbane, where I bored every one of my relatives who had not already been warned to avoid me, on what a miraculous find this had been, and how hard it was to find one of these in the wild. Maybe they are common somewhere, but this is the first that I have seen in thirty years of sniffing out old tools.
There is a little more on Disston Backsaws HERE.
no9saw.jpg
I have now more backsaws than I regularly use and a cull is in order.
It has prompted me to consider for my next BLOG post a small presentation on Backsaws from the perspective of usefulness.
Stay tuned.
In the meantime I am one happy little vegemite.
Interestingly, Peter has responded to this post with an application for a patent by William J Reagan, issued on December 8 1874 for an Improvement in Handles for Saws, that contains the recess for the thumb.
The inventor thought that this same improvement could be added to other tool handles such as those on planes.
The link can be found here:
Patent number: 157634 Filing date: Nov 14, 1874 Issue date: Dec 8, 1874
Many thanks Peter.
NOTE: - All images used from other websites are acknowledged under each image.
On one of our recent trips, we were making good time, so we planned a late lunch and pulled off the highway into the little hamlet of Bangalow.
There is a particular park that has been a stopping spot for us for decades.
Well, on this occasion, the town was busy - no car parks anywhere - not even down by the old railway station.
We drove around and around before spotting a vacancy at the bottom of the hotel carpark.
For Patrons Only didn't worry us, as we were going inside to order drinks in any case.
Unknown to us all these years, was the fact that we had parked next to the back gate of HEATH'S OLD WARES & COLLECTABLES
After lunch the emporium begged us to go see.
heathsOldWaresCounter.jpg
Apart from having cornered the market in old wooden ladders, Heath had aisles full of wonders.
It was down this next aisle that I discovered a milk churn full of saws:
aisle1HeathsOldWaresBangalo.jpg
And among these saws there was this:
Needless to say, it didn't look this good at the time, and it has had a set and a sharpen since, but it was an unmistakable Disston Number 9 Backsaw.
The handle was complete, with no cracks or chips out of the spurs.
Even the brass saw nuts were in good shape.
The blade was straight and had only the slightest suggestion of rust dimpling.
This was a must have!
A quick check of my wallet showed that the moths had long ago vacated, and I was in the position of convincing my beloved of what an awesome buy this was, and could she go find an ATM while I guarded this piece of royalty of the sawmaker's art.
Long story short - it travelled with us to Brisbane, where I bored every one of my relatives who had not already been warned to avoid me, on what a miraculous find this had been, and how hard it was to find one of these in the wild. Maybe they are common somewhere, but this is the first that I have seen in thirty years of sniffing out old tools.
There is a little more on Disston Backsaws HERE.
no9saw.jpg
I have now more backsaws than I regularly use and a cull is in order.
It has prompted me to consider for my next BLOG post a small presentation on Backsaws from the perspective of usefulness.
Stay tuned.
In the meantime I am one happy little vegemite.
Interestingly, Peter has responded to this post with an application for a patent by William J Reagan, issued on December 8 1874 for an Improvement in Handles for Saws, that contains the recess for the thumb.
The inventor thought that this same improvement could be added to other tool handles such as those on planes.
The link can be found here:
Patent number: 157634 Filing date: Nov 14, 1874 Issue date: Dec 8, 1874
Many thanks Peter.
NOTE: - All images used from other websites are acknowledged under each image.