Life in the Village and beyond, based around the interests of my life.

Life in the Village and beyond, based around the interests of my life. Sunset at Telegraph Point.

Wednesday, June 11, 2014

Building a Hall Table - Part 3 - Sanding and Finishing

Although the timber is dressed and finished, it is quite open grained and in parts the grain reverses or becomes more like end grain.
It requires sanding through all grades of grit from 100 to 400 before a series finishing coats is applied.

I started with a three part mix of 1/3 boiled linseed oil, 1/3 polyurethane and 1/3 mineral turpentine.
This really brought out the colour in the camphor laurel.

It takes ages to dry at the moment because of the colder weather and the extra humidity.

After several coats, with a very light sanding with 400 grit between coats, I finished it with straight polyurethane.
Here are some images of the finished result:




Hooray - all done.
Now to get back to my ukulele ......................

4 comments:

  1. How does this wood scrape with a #80?

    ReplyDelete
    Replies
    1. Not well Ralph.
      I did try it but the timber is soft and does not respond to the scraper as well as I would like.
      Cheers
      Tom

      Delete